Our Blog

One of the sure signs that summer has arrived is the unmistakable aroma of barbecue drifting over backyards across the country.

If you’re new to braces, you might be wondering just how many of your favorite outdoor treats can still go on your plate. Good news! You have a lot of braces-friendly options available—with a little extra planning on your part. Two things to remember: tools and textures.

• BBQ Tools

We’re not talking about spatulas and tongs and skewers—the barbecue tools we’re talking about here are your knife and fork. Sure, many classic BBQ dishes are finger foods, but those are the very dishes which can cause problems for your braces.

Eating savory ribs or chicken legs, juicy burgers or hot dogs, or delicious corn on the cob the traditional way means biting into these foods with your front teeth. That biting puts a lot of pressure on your braces and can lead to bent wires and loose or broken brackets.

But there’s a way to get around this without giving up on your tasty favorites! There’s no rule against using your knife and fork at a BBQ, and there’s no need to bite into foods when you can cut them up into small, manageable pieces.

If you remove meat from bones before eating, if you deconstruct your grilled burger or brat by cutting it up into smaller pieces, if you slice the kernels off your corn on the cob, you can chew with your back teeth and avoid any damage to your brackets and wires. Cut grilled foods into manageable bites just like you do with your regular meals, and you won’t be leaving the party early!  

• BBQ Textures

Now let’s talk texture. Crunchy, hard, and sticky foods should never be on the menu when you’re wearing braces. These foods can damage your wires and brackets or get stuck between your braces and your teeth.

This is a time for clever substitutions. Exchange the corn chips for soft potato or pasta salad. Trade crusty and seeded buns for softer, seedless versions. Skip the grilled sticky s’mores and enjoy creamy, soft ice cream instead—but without nuts or other crunchy, sticky additions, please!

Drs. Gregory Hummon and Thomas Gebeck and our team are happy to offer suggestions for what to eat and how to eat it safely while you’re in braces at our Birmingham orthodontic office. There are unavoidable events that can put a damper on outdoor activities. Pouring rain and insect pests—not much we can do about those. But taking simple precautions with your braces means no bent wires and broken brackets to ruin your BBQ fun. Now, dig in!

The dog days of summer are upon us, and with the temperatures soaring, our team at Dr. Hummon & Dr. Gebeck Orthodontic Associates PC wants you to be extra careful about sun safety when you’re out and about. Check out this incredibly helpful article on the Ten Summer Safety Tips for Kids, courtesy of Discovery.

Drs. Gregory Hummon and Thomas Gebeck and our team also encourage you to always have a bottle of water handy when heading out into the sun.

We hope you’re having a great summer! Let us know what you're up to below or on our Facebook page!

Whenever we bite down, we’re applying force with our jaw muscles. Functional appliances direct these forces to create healthier tooth and jaw alignment. They’re used to help correct bite problems and to encourage symmetrical jaw growth.

Functional appliances aren’t always necessary. Because every child’s teeth and bite are different, orthodontic treatment at our Birmingham office is carefully tailored to your child’s individual needs.

• For the child with minor tooth misalignment, traditional braces or aligners might be all that’s needed.
• For the child with a minor malocclusion, or bite problem, an orthodontist might use elastics (rubber bands) to bring teeth into healthy alignment.
• For the child who has a more serious malocclusion, involving both tooth and jaw alignment, an orthodontist might recommend a functional appliance.

A severe Class II malocclusion can be caused when the upper jaw or teeth are positioned too far forward, and/or the lower jaw is too small or positioned too far back. Common Class II malocclusions include:

• Open bite—the front teeth don’t touch when the back teeth bite down, or the back teeth don’t touch when the front teeth close.
• Overbite—some overbite is normal. A deep overbite occurs when the upper teeth significantly overlap the lower teeth.
• Overjet—the upper front teeth protrude further horizontally than they should.

Today’s functional appliances come in a variety of designs to treat Class II malocclusions. They can be fixed or removable. They can be used with or without braces. Some are designed to expand the upper palate to make sure there’s room for all the permanent teeth. What they all do is advance the position of the lower teeth and jaw to create a healthier, more comfortable bite.

Fixed devices are attached to the teeth and meant to be used full-time. These include the Forsus™ device, the Herbst® appliance, and the MARA appliance.

• Forsus Device

This appliance works with braces. A spring coil rod is most often attached to bands on the first molars on the upper jaw. It’s then connected to the arch wire on the lower jaw. Just like elastics—but more effective!—these spring coil rods provide gentle forward pressure that encourages the lower jaw and teeth forward.  

• Herbst Appliance

The Herbst appliance also applies forward pressure to the lower jaw using telescoping rods connecting the upper and lower teeth. The rods expand as the mouth opens, and telescope together as it closes, positioning the lower jaw further forward while the upper jaw is held back. The Herbst can be worn alone or with braces, and can also be used to expand the upper palate.

• MARA Appliance

The MARA (Mandibular Anterior Repositioning Appliance) uses an adjustable “elbow” piece connecting bands on upper and lower molars to guide the lower jaw and teeth forward when the jaw closes.

Removable appliances such as Bionator and Twin Block appliances can also improve Class II malocclusions. They are meant to be worn for a specific number of hours each day, and can be taken out for sports or other activities as needed. Because it’s essential to get all the necessary hours in, removable appliances require commitment!

• Bionators

A bionator is made of wire and acrylic, and it looks a lot like a retainer. The wire fits around the upper front teeth. It’s attached to a smooth piece of acrylic that sits behind the upper teeth and is shaped to guide the lower jaw forward when biting down. The bionator can also be adjusted to expand the upper palate.

• Twin Block Appliance

The twin block appliance uses two separate pieces made of wire and smooth acrylic. Both pieces are modeled to fit precisely over the upper and lower arches. The acrylic “blocks” fit over the biting surfaces of the teeth, working together like a 3D puzzle. When your child bites down, the upper blocks slide into place behind the lower blocks, pushing the lower jaw and teeth forward. The top plate can also be adjusted to expand the upper palate if needed.

Because these appliances are best used while a child’s bones are still growing and developing, dentists and orthodontists recommend an orthodontic evaluation by age seven. Early treatment with a functional appliance can help correct serious bite problems before or together with braces. In some cases, functional appliances may reduce the need for headgear or surgery.

Todays’ orthodontic technology has made functional appliances more comfortable and efficient than ever before. Talk to Drs. Gregory Hummon and Thomas Gebeck to discover how an individualized treatment plan and a custom appliance can give your child a healthy bite and a lasting smile.

Wearing orthodontic braces may be the best choice for correcting your teeth and improving your smile, and that's why you've come to see Drs. Gregory Hummon and Thomas Gebeck at Dr. Hummon & Dr. Gebeck Orthodontic Associates PC. Braces, which consist of brackets and wires, work by gently applying pressure to the teeth, and that pressure causes them to move into the correct position. In some cases elastics, or rubber bands, are used to apply additional pressure needed to move your teeth.

The Purpose of Elastics

Customized for each patient, the rubber bands typically stretch over tiny loops on the top and bottom brackets. If worn consistently, and every day, these tiny elastics will apply the steady pressure needed to guide your teeth into the correct position.

These elastics are crafted from medical-grade latex, which is safe to be in contact with your mouth. It's common to remove the elastics during meals if opening your mouth wide enough to eat is difficult. Our staff will demonstrate how to affix the elastics so it will soon become second nature to replace them.

The Do’s and the Don'ts

DO - Get in the habit of carrying around extra rubber bands and replace them as soon as one breaks. By consistently wearing the elastics, you may shorten the overall time needed to wear braces.

DON'T - Double up on elastics as this will cause too much pressure on the tooth or teeth and can actually harm the root of the tooth.

DO - Always wash your hands before removing or replacing the rubber bands.

DON'T - Overstretch the rubber band or it will lose its strength and it will be ineffective.

DO - Call us if you run out of rubber bands.

DO - Have fun with your braces and elastics. There are many different colors available that can let you show off your soon-to-be perfect smile.

Rubber bands are a key part of your orthodontic treatment, and learning how to remove and replace them is an important part to maintaining your braces. Before we set you on your journey to a perfect smile, we'll make sure you understand all there is to know about how to take care of your braces. Of course, if you have any questions about your orthodontic treatment, or orthodontics in general, be sure to contact our Birmingham office, and our staff will be happy to assist you!